IKO enertherm VIP, powered by Kingspan OPTIM-R, is a rigid vacuum insulation panel with microporous core which is evacuated, encased and sealed in a thin, gas-tight envelope, giving outstanding thermal properties, with the thinnest possible solution to insulation problems. The IKO enertherm VIP insulated panel comes with a pre-bonded protective layer underneath offering superior product …
IKO enertherm MW Upstand Board is a laminate of a dense, stone wool insulation slab bonded to a tough, weather resistant facing board. It is used for the thermal insulation and protection at upstand, parapet walls and protrusions where a non-combustible insulation solution is required. Buy yours with us today at www.insulationbee.co.uk or speak to …
IKO enertherm KR ALU Insulation Board is clad on both sides with a multi-layer gastight aluminium construction complete with an overprinted grid reference to assist with the installation of underfloor heating. IKO enertherm KR ALU Insulation Board is a 100% CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both …
IKO enertherm KR ALU Insulation Board is clad on both sides with a multi-layer gastight aluminium construction complete with an overprinted grid reference to assist with the installation of underfloor heating. IKO enertherm KR ALU Insulation Board is a 100% CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both …
IKO enertherm GOLD is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality rooftop insulation consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water …
IKO enertherm Insulated Hard Edge is a stop batten that combines the properties of an incompressible perimeter edge or gutter termination to prevent cold bridging. IKO enertherm Insulated Hard Edge can be used with felt, mastic asphalt, single-ply and liquid waterproofing. Buy yours with us today at www.insulationbee.co.uk or speak to one of our friendly …
IKO enertherm EPS HP 200 insulation for inverted roof is manufactured from an innovative expanded polystyrene (EPS) with low water absorption properties. Approved to ETAG 031 (European Technical Approval Guidelines), IKO enertherm EPS 200 HP is an excellent option where a thinner insulation board is required without the loss of thermal performance compared to IKO …
Buy IKO enertherm EPS HP 200 insulation for inverted roof Read More »
IKO enertherm EPS 300 E insulation for inverted roof is manufactured from an innovative expanded polystyrene (EPS) with low water absorption properties. Approved to ETAG 031 (European Technical Approval Guidelines), IKO enertherm EPS is supplied in both 300 E as well as 200 E grade boards to meet the specified compression performance. IKO enertherm EPS …
IKO enertherm EPS 200 E insulation for inverted roof is manufactured from an innovative expanded polystyrene (EPS) with low water absorption properties. Approved to ETAG 031 (European Technical Approval Guidelines), IKO enertherm EPS is supplied in both 200 as well as 300 grade boards to meet the specified compression performance. IKO enertherm EPS 200 grade …
IKO enertherm BGF PIR Insulation Board is clad on both sides with a polypropylene-covered bitumen sand free glass membrane to assist in the application of single-ply membranes. IKO enertherm BGF PIR Insulation Board is a 100% CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core. Buy yours with us today at www.insulationbee.co.uk …
Office 276b, 182-184 High Street North London E6 2JA
